Description

When you’ve got a conveyor system, elevator, or chain drive that’s not running smooth, a worn sprocket is usually the culprit. This 26-tooth #50 chain sprocket is built for the daily grind of moving grain, feed, or materials around your operation. With the right tooth count and pitch, it’ll keep your chains running true and your equipment moving like it should.

What You’re Getting

Precision-cut 26 teeth designed to grip #50 roller chain perfectly
X-Series hub construction that handles the torque and stress of farm work
Weld-on design for permanent installation on shafts and drive systems
Steel construction that stands up to dirt, moisture, and heavy use

Built for Real Farm Work

This sprocket fits right into grain handling equipment, feed conveyors, manure systems, and other chain-driven machinery you’ll find around the farm. The 26-tooth configuration gives you a good balance of speed and torque transfer, making it ideal for applications where you need steady, reliable power transmission without high speeds.

Made to Last

Farm equipment sprockets take a beating from dust, debris, and constant loading. This one’s built from quality steel and machined to tight tolerances so it meshes properly with your chain. The weld-on hub means once it’s installed, it stays put through all the vibration and stress of daily operation.

Good to Know

Make sure your existing chain is truly #50 pitch before ordering – measure from pin center to pin center for 5/8 inch spacing. When welding, work around the hub in small sections to prevent warping from heat buildup. A little chain lube goes a long way toward extending both chain and sprocket life.