Description

That persistent oil seep from your front axle swivel housing isn’t just annoying—it’s a warning sign that your 4WD system needs attention before expensive damage occurs. When you’re running high-horsepower tractors like these, a failed hub seal can quickly lead to catastrophic bearing failure and serious downtime. This 60x90x10mm seal stops gear oil leaks at the critical pivot point where your front wheels turn, protecting your investment in front axle components.

What You’re Getting

Precision 60mm ID x 90mm OD x 10mm width for perfect fit
Double-lip design that keeps oil in while blocking contaminants
Heat-resistant construction that handles operating temperatures
Direct replacement for numerous John Deere series without modifications

Built for Real Farm Work

This seal fits John Deere models including: 7610, 7710, 7810 Series; 8100, 8200, 8300, 8400 Series; 8120, 8220, 8320, 8420, 8520 Series; and 8225R through 8270R Series tractors. Whether you’re pulling heavy implements with your 8R series or handling loader work with a 6M, these 4WD tractors put serious stress on front axle components. The swivel housing is where the stationary axle meets the steering knuckle, handling both power transfer and steering loads in tough conditions.

Made to Last

This seal sits at one of the highest-stress locations in your front axle system, where constant steering motion meets 4WD pressures. The advanced elastomer construction resists breakdown from gear oil exposure while maintaining flexibility through temperature swings and angular movement during turns.

Installation Notes

Proper installation is critical for hub seals. Clean the seal bore thoroughly and check for any damage or wear. Inspect the sealing surface on the spindle or axle – even minor grooves will cause rapid seal failure. Use a proper seal driver to install square and to correct depth. When one hub seal fails, consider servicing both sides – they have the same hours and operating conditions. Check the swivel housing for play that could indicate bearing wear before installing your new seal.