Description

When you’re setting up your sprayer system or irrigation lines and need to make a sharp turn from a threaded connection to a hose, this 90-degree elbow fitting gets the job done without the kinks and stress that can cause problems down the road. This handy poly fitting connects 2-inch male pipe threads to 2-inch hose connections at a right angle, making it perfect for tight spaces where you can’t run straight lines.

What You’re Getting

Heavy-duty poly construction that won’t rust or corrode like metal fittings
Male NPT threads on one end for secure connection to tanks, pumps, or other threaded fittings
Ridged hose barb on the other end that grips your hose tight and won’t pull loose
90-degree angle lets you change direction without putting stress on your connections
2-inch size handles serious flow rates for bigger spraying or irrigation jobs

Built for Real Farm Work

This fitting is sized for the heavy-duty applications you’ll find around the farm—connecting spray tanks to boom systems, setting up irrigation lines, or plumbing wash-down stations. The 2-inch capacity moves plenty of water or chemical solution, making it ideal for field sprayers, livestock watering systems, or any setup where you need good flow rates.

Made to Last

Poly fittings like this one handle temperature changes and chemical exposure better than metal alternatives. They won’t rust out or seize up over time, and the material stays flexible enough to handle vibration without cracking. You’ll find this fitting holds up season after season in outdoor applications.

Installation Notes

Thread the male end into your tank or fitting using pipe thread sealant or Teflon tape for a leak-free connection. The hose barb end slides into your hose—a little dish soap on the barb makes installation easier if the hose is tight. Secure the hose with a quality clamp to prevent blow-offs under pressure.