Description

When your conveyor, elevator, or drive system starts slipping or making noise, a worn sprocket is often the culprit. This 54-tooth sprocket gives you the reliable power transfer you need to keep grain moving, equipment running, and your operation on schedule. With #50 chain being one of the most common sizes in agricultural equipment, this sprocket fits right into your existing setup.

What You’re Getting

54 teeth provide smooth power transmission and reduced chain wear
X-Series hub design fits standard agricultural equipment shafts
Welded construction stands up to the dirt, moisture, and vibration of farm work
Direct replacement for multiple part numbers—no modifications needed

Built for Real Farm Work

This sprocket works with any #50 chain system on your farm, whether it’s moving grain in an elevator, driving a conveyor on your planter, or powering an auger system. The 54-tooth count is ideal for applications where you need good speed reduction and torque multiplication while keeping the chain running smoothly.

Made to Last

Farm equipment sprockets take a beating from dust, weather, and constant use. This one’s built with welded construction that holds up season after season. The steel construction resists wear from chain contact and won’t crack under the stress of heavy loads or sudden starts and stops.

Good to Know

Count your existing teeth before ordering to make sure you’re getting the right ratio for your application. The 54-tooth count works well for most standard farm applications, but if you’re changing from a different tooth count, it’ll affect your speed and torque. Keep some chain lubricant handy during installation—a well-lubricated chain and sprocket setup lasts much longer.