Description

There’s nothing more frustrating than a tractor that floods, sputters, or runs rough because the carburetor won’t regulate fuel properly. If you’ve got fuel running out your air cleaner, your engine hunting at idle, or raw gas smell around the carb, chances are your float needle valve has given up the ghost. This replacement valve puts an end to those problems and gets your old Deere running smooth again.

What You’re Getting

Precision-engineered stainless steel construction that won’t wear or corrode like the old brass needles
Hard chrome plating on the needle tip that seals tight against the seat every time
Perfect drop-in replacement for worn original valves on all the classic Deere letter series
Matches the flow rate and pressure specs your carb was designed for

Built for Real Farm Work

This needle valve keeps classic John Deere tractors running right—from the little Model A that started it all to the powerful G series row-crop machines. Whether you’re cultivating with a Model B, harvesting with a C, or doing heavy tillage with a D, these tractors were built when things were meant to last forever, and this valve lives up to that standard.

Made to Last

The stainless steel body and hard chrome needle handle today’s ethanol fuels and temperature swings that would’ve destroyed the original brass parts. This valve keeps doing its job season after season, maintaining that perfect seal that prevents flooding and ensures your engine gets exactly the fuel it needs.

Good to Know

Installation is straightforward—just make sure you clean the needle seat thoroughly before installing the new valve. A quick tip: check your float level while you’ve got things apart, as a bent float arm can cause the same symptoms as a bad needle valve. Keep some carb cleaner handy during the job, and you’ll have everything running sweet in no time.