Heavy Duty Lift Rod Assembly for Ford New Holland 60 Series and TM Series Tractors

Description

When your three-point hitch starts getting sluggish or won’t hold position under load, the lift rods are often the culprit. These are the workhorses that connect your hydraulic system to the lower lift arms, handling all the stress when you’re raising a heavy disc or holding up a loaded manure spreader. This heavy-duty assembly is built to handle the demands of big Ford New Holland tractors and the implements they’re expected to lift.

What You’re Getting

• Heavy-duty construction that’s stronger than the original equipment for demanding farm work
• 56cm long slide pipe provides the proper stroke length for full lift range on these bigger tractors
• Precision-machined components ensure smooth operation and proper hydraulic response
• Direct replacement design bolts right in place of the original lift rod assembly
• Built to handle the hydraulic pressures and loads these tractors generate

Built for Heavy Farm Work

This assembly fits the larger Ford New Holland tractors – the 60 Series row-crop machines and TM Series utility tractors. These are serious farm tractors designed for heavy tillage, large implements, and demanding field work. Whether you’re running a big offset disc, heavy cultivator, or three-bottom plow, these tractors need lift components that can handle the weight and stress.

Made to Last

Farm hydraulics take a beating, especially on the three-point hitch where you’re constantly raising and lowering heavy implements. This heavy-duty version uses stronger materials and improved design over the standard assembly. The longer slide pipe gives you the full lift capacity your tractor was designed for, while the robust construction handles the pressure spikes that come with heavy implement work.

Good to Know

Installation involves removing the old lift rod from the hydraulic piston and lower lift arm connections. You’ll want to support the implement or lower the arms completely before starting. The 56cm slide pipe length is specifically for the larger tractors – there’s a shorter version available for the 40 Series models. Clean all hydraulic fittings thoroughly during installation and check your hydraulic fluid level when you’re done.