Description

When you’re plumbing hydraulic systems or fuel lines on your tractor, sometimes a straight shot just won’t work. That’s where this 1-inch 45-degree elbow comes in handy. It gives you the perfect angle to route your lines around obstacles without creating sharp bends that can restrict flow or cause premature failure.

What You’re Getting

1-inch NPT threads on both ends for a secure, leak-free connection
45-degree angle that’s just right for most routing situations
Durable construction that handles the pressure and vibration of farm equipment
Direct replacement fitting – no adapters or modifications needed

Built for Real Farm Work

This elbow works great in hydraulic systems, fuel lines, and other fluid applications on tractors, loaders, combines, and implements. Whether you’re running hydraulic cylinders on a loader, routing fuel lines around the engine bay, or connecting remote hydraulic systems, this fitting gives you the flexibility to route things properly.

Made to Last

Farm equipment puts fittings through the wringer with constant pressure changes, temperature swings, and vibration. This elbow is built to handle those conditions season after season, with threads that stay tight and materials that resist corrosion from agricultural chemicals and moisture.

Installation Notes

Always use thread sealant or Teflon tape on NPT threads to prevent leaks. Thread the fitting in hand-tight, then add another turn or two with a wrench – don’t over-tighten as this can crack the threads. Check for leaks after installation and retighten if needed once the system has cycled a few times.