Description

When you’re running equipment with an older filtration system, finding the right filter element can be a real headache. This Baldwin P67 oil filter element slips right into Purolator N1600 series housings and keeps your Massey Ferguson engine running clean. When you’re depending on a piece of equipment to get the job done, the last thing you want is an engine problem that could’ve been prevented with a good oil filter.

What You’re Getting

5 1/4 inch length with 3 23/32 inch outer diameter for proper fit in your housing
Two attached end seals plus one F-gasket included for complete installation
Quality filtration media that traps harmful particles while maintaining oil flow
Direct replacement that installs without modifications or special tools

Built for Real Farm Work

This filter serves equipment that works hard for a living – from construction machinery moving dirt and loading materials to farm tractors running PTO equipment and pulling implements. Whether it’s a Bobcat skid steer on a job site, a Case loader handling feed, or a Massey Ferguson tractor in the field, these machines count on clean oil to keep expensive engines protected. The Purolator N1600 housing system was common on many Massey Ferguson engines, providing reliable filtration in a cartridge-style setup.

Made to Last

Baldwin has been making filters for decades, and they understand what it takes to protect engines in demanding conditions. Baldwin filters have been protecting engines for decades with quality media that captures contaminants while maintaining proper oil flow. The sturdy construction handles the pressure fluctuations and harsh conditions your Kubota faces, while the reliable gasket ensures a leak-free seal.

Good to Know

Installing this element is straightforward – the attached end seals and included F-gasket make it a complete replacement package. Change this filter with every oil change, typically every 200-250 hours or per your operator’s manual. Apply a thin coat of clean oil to the gasket before installation, then hand-tighten three-quarters turn after the gasket contacts the mounting surface. Make sure your housing is clean before installing the new element to prevent contaminating fresh oil.