Description

When you’re building or repairing hydraulic systems on your equipment, you need fittings that connect reliably and won’t fail when the pressure’s on. This Parker 43 Series crimp fitting gives you a solid connection between your 3/4-inch hydraulic hose and any 1-inch NPT male threaded port, whether that’s on a valve, pump, or cylinder.

What You’re Getting

Parker quality construction that meets the same standards as factory equipment
Straight rigid design that keeps connections solid even with vibration and movement
Precision NPT threads that seal properly without over-tightening
Crimped connection that’s permanent and leak-free when properly installed
43 Series specification that’s proven in agricultural applications

Built for Real Farm Work

This fitting is designed for the heavy-duty hydraulic systems you’ll find on tractors, combines, balers, and other agricultural equipment. Whether you’re running a loader, operating a three-point hitch, or powering implements, hydraulic systems need connections that can handle both high pressure and the constant movement that comes with farm work.

Made to Last

Parker builds these fittings to handle the pressures and stresses of agricultural hydraulics. The steel construction resists corrosion and wear, while the precision machining ensures proper thread engagement and sealing. Once crimped, this connection will handle whatever your hydraulic system can throw at it.

Good to Know

This is a crimp-on fitting, so you’ll need the proper crimping equipment and dies for installation. Make sure your hose end is cut square and clean before crimping. The 1-inch NPT thread is tapered, so it’ll seal with pipe thread compound or Teflon tape – don’t over-tighten or you’ll damage the threads.