Description
When your disc harrow cuts unevenly or your cultivator digs too deep on one side, it’s usually not the implement’s fault—it’s likely your three-point hitch isn’t level. This leveling box assembly gives you the precise adjustment control you need to get your implements working properly and keep them there, no matter what you’re pulling behind your Case IH.
What You’re Getting
- Adjustable range from 580mm to 710mm (22.8″ to 28″) for versatile implement matching
- 27mm narrow inside fork design that fits Case IH mounting points perfectly
- Threaded adjustment that stays put once you’ve got it dialed in
- Direct replacement assembly that mounts just like the original
Built for Real Farm Work
This assembly works across a wide range of Case IH tractors, from the smaller 74 and 84 series utility machines up through the more powerful 85 and 95 series models, plus the newer 3000 and 4000 utility series. Whether you’re running a 574 with a finish mower or pulling a heavy disc with an 885, this leveling box handles the adjustment range you need for different implements.
Made to Last
Farm work puts stress on every component, and the three-point hitch takes more abuse than most. This assembly is built to handle the constant lifting, lowering, and side loads that come with field work. The threaded adjustment mechanism maintains its accuracy even after thousands of cycles, and the robust construction won’t bend or develop play under heavy implement loads.
Installation Notes
This is a direct replacement for your original leveling box—no modifications needed. Before you remove the old one, measure its current setting so you can start the new assembly in roughly the same position. Clean the mounting threads and apply a light coat of anti-seize compound to make future adjustments easier.
Reviews
There are no reviews yet.