Description

When your PTO shaft starts clicking or your implement isn’t getting smooth power, a worn implement yoke is usually the culprit. Every time you engage that bush hog, feed mixer, or tiller, this yoke transmits all your tractor’s power while dealing with misalignment, shock loads, and constant angle changes. When yoke bearings wear out or the bore gets sloppy, you get vibrations that destroy U-joints, damage implement gearboxes, and create dangerous operating conditions. This Weasler replacement yoke brings back the solid connection your equipment needs to run right.

What You’re Getting

Precise 1-1/4 inch round bore with standard 1/4 inch keyway that fits tight and stays that way
Standard 14 series cross and bearing size (1-1/8 inch cap diameter) that’s common on many implement shafts
Weasler quality construction – forged tough and machined to tight tolerances so it slides on smooth but doesn’t slop around after a season of use
3-7/8 inch center of bearing to yoke end dimension for proper clearances in your driveline

Built for Real Farm Work

This Series 14 yoke is right at home on implements like smaller rotary cutters, tedders, rakes, and other PTO equipment that doesn’t need the beef of a Series 35 or 44. It’s perfect for those 40-80 horsepower tractors running lighter implements. You’ll find these on everything from 5-foot brush hogs to hay tedders, anywhere you need reliable power transfer without overkill. The 1-1/4 inch bore size is common on many implement input shafts where you need a solid connection that handles daily farm work.

Made to Last

Weasler doesn’t just make generic driveline parts – they understand the punishing conditions farm equipment faces. This yoke uses heavy-duty construction throughout, from the precisely machined bore that maintains tight tolerances, to the robust bearing caps that keep U-joints running true. The keyway is cut deep enough to handle full power without wallowing out, and the overall design balances strength with the flexibility needed for constantly changing operating angles.

Installation Notes

Installing a PTO yoke correctly is critical for safety and longevity. Ensure your implement shaft is exactly 1-1/4 inch diameter and has a matching 1/4 inch keyway – forcing mismatched components invites disaster. The shaft should slide in smoothly without excessive play. Always use the proper length key and secure with appropriate fasteners. Check that assembled driveline length allows full range of motion without bottoming out or pulling apart.