Description
When you’re plumbing hydraulic systems or setting up shop air lines, you need fittings that’ll hold up to pressure and weather. This 6-inch galvanized pipe nipple gives you the reach you need to connect components that aren’t quite close enough together, whether you’re running lines around equipment or bridging gaps in your setup.
What You’re Getting
- Male NPT threads on both ends for versatile connection options
- Heavy galvanized coating resists rust and corrosion for years of outdoor use
- Six-inch length handles most spacing challenges without needing extra fittings
- Standard 1-inch pipe size works with common farm hydraulic and pneumatic systems
Built for Real Farm Work
This nipple works great in hydraulic systems, shop air lines, and anywhere you need to extend or connect pipe runs. The 1-inch size is common on larger tractors, combines, and shop equipment where you’re dealing with higher flow rates. It’s also handy for custom plumbing jobs around the farm where you need that extra reach.
Made to Last
The galvanized coating protects the steel underneath from moisture and corrosion, so this fitting will keep working even when exposed to weather. The threads are cut clean and deep, giving you a tight seal when properly installed with pipe dope or thread tape.
Good to Know
Always use thread sealant when installing – pipe dope works well for most applications, but use thread tape if you’re dealing with chemicals or fuel. Hand-tighten plus one to two turns with a wrench is usually plenty. Don’t over-tighten or you risk cracking the fitting or the components you’re connecting to.
Reviews
There are no reviews yet.