Description
When you’ve got hydraulic cylinders, pumps, or valves spread out across your equipment, you need a hose that can reach where the action is. This 10-foot hydraulic hose assembly gives you the length to connect remote components without struggling with extensions or makeshift connections. Whether you’re running hydraulics to a front loader, backhoe attachment, or remote valve, this assembly gets the job done right.
What You’re Getting
- 2-wire construction handles working pressures up to 2,000 PSI for most farm applications
- Male rigid NPT fittings thread directly into ports—no adapters or extra connections needed
- 1/2-inch bore provides solid flow rates for cylinders and motors without pressure drop
- Ready to install—no crimping, cutting, or assembly required on your end
- 120-inch length handles long runs between components or around obstacles
Built for Real Farm Work
This hose works great for connecting hydraulic pumps to remote cylinders on loaders, extending lines to auxiliary valves mounted away from the main system, or replacing damaged hoses on implements. The 2-wire design handles the pressure and flex cycles you’ll see on most farm equipment hydraulics. At 10 feet long, it’s perfect for those applications where standard short hoses just won’t reach.
Made to Last
The AgSmart brand uses quality rubber compounds that stay flexible in cold weather and resist cracking from UV exposure. The 2-wire reinforcement prevents the hose from ballooning under pressure while still allowing enough flex for moving applications. NPT threads are cut to proper specifications so they seal without over-tightening.
Installation Notes
Use pipe thread sealant on the NPT threads—avoid tape that can break loose and contaminate your system. Don’t over-tighten the fittings; NPT threads seal on the taper, not just torque. Support long runs with clamps to prevent vibration damage, and keep some clearance around moving parts so the hose doesn’t get pinched.
Reviews
There are no reviews yet.