Description
When you’re building or repairing farm equipment, you need fasteners that can handle the constant vibration, heavy loads, and weather that come with the territory. This 3/4-inch by 6-inch carriage bolt gives you the holding power for heavy-duty connections on everything from loader brackets to three-point implements. The smooth round head won’t snag on anything, and that square neck locks into place so the bolt won’t spin when you’re tightening the nut.
What You’re Getting
- Grade 5 strength that’s 25% stronger than hardware store bolts but costs less than Grade 8
- 6-inch length handles thick steel sections and multiple layers with room to spare
- Zinc coating resists rust and corrosion from moisture and road salt
- UNC thread pitch for standard nuts and compatibility with most farm equipment
- Square shoulder design prevents spinning during installation
Built for Real Farm Work
This size bolt is perfect for heavy structural connections on tractors, implements, and shop-built equipment. You’ll find 3/4-inch bolts holding together loader mounts, cultivator frames, hay equipment, and other applications where you need serious clamping force. The 6-inch length works great when you’re bolting through thick channel iron or need to sandwich multiple brackets together.
Made to Last
Grade 5 bolts hit the sweet spot between strength and cost for most farm applications. The zinc plating helps them stand up to the elements so they won’t rust out on you after a season or two of field work and weather exposure.
Good to Know
Always use flat washers under both the head and nut to distribute the load properly and prevent the fastener from pulling through. If you’re replacing rusty bolts, clean out the threaded holes with a tap if needed. A dab of anti-seize compound on the threads makes future removal much easier, especially on connections that might see heat or road salt.
Reviews
There are no reviews yet.