Description
When your John Deere’s 6-cylinder diesel starts burning oil, losing compression, or blowing smoke, you know it’s time for more than just an oil change. This basic in-frame overhaul kit gives your 359 cubic inch engine a fresh lease on life without the expense and downtime of a complete rebuild. If your tractor’s still got good main and rod bearings but needs new rings and sleeves, this kit gets you back to work at a fraction of the cost.
What You’re Getting
- Complete sleeve and seal set to restore proper bore dimensions and stop oil consumption
- Quality three-ring pistons with pins and retainers for standard compression engines
- Valve-grind gasket set to handle the top end work that goes with new sleeves
- Oil pan gasket included so you can button everything up properly
- Tru-Power quality that’s been trusted by farmers for decades
Built for Real Farm Work
This kit fits the 2940, 2950, and 2955 series tractors that handle everything from heavy tillage to loader work around the farm. These 6-cylinder diesels are known for their durability, but after years of hard work, even the best engines need attention. The 4.19-inch standard bore and three-ring piston design match what John Deere used from the factory.
Made to Last
Tru-Power components are built to handle the constant vibration and temperature cycles that come with tractor work. The sleeves are precision-machined to original specifications, and the pistons are marked with the “B” designation to match your standard compression engine. Quality materials and proper tolerances mean this rebuild will give you years of reliable service.
Good to Know
Check your rod bolt length before ordering – you’ll need to add either TP-R74194 bolts for 2.125-inch length or TP-R80033 for 2.325-inch length. This is an in-frame job, so you can do the work with the engine in the tractor. Make sure your main and rod bearings are still in good shape before starting – if they’re worn, you’ll want to step up to a complete overhaul kit.
Reviews
There are no reviews yet.