Hydraulic Crimp Fitting for 1/4 Inch Hose with Female NPT Swivel Connection

Description

When you’re building or repairing hydraulic lines on your farm equipment, having the right crimp fitting can make the difference between a job done right and a comeback leak. This Parker HY series fitting gives you that reliable swivel connection you need when hose routing gets tight or when you need to connect to components that might shift during operation. The female NPT threads connect cleanly to your existing hydraulic fittings while the swivel design takes the stress off both the hose and the connection point.

What You’re Getting

• Precision-machined 1/4 x 18 NPT female threads that seal properly without cross-threading
• Swivel design reduces stress on hose connections and allows for easier routing
• Parker HY series quality construction built for hydraulic pressures and farm conditions
• Direct crimp attachment to 1/4-inch hydraulic hose – no adapters or reducers needed
• Straight configuration keeps your hydraulic lines clean and organized

Built for Real Farm Work

This fitting is designed for the hydraulic systems found on tractors, loaders, balers, combines, and other agricultural equipment where 1/4-inch hydraulic lines are common. You’ll find these smaller lines on pilot controls, gauge lines, and auxiliary hydraulic circuits that operate everything from hydraulic fans to implement controls.

Made to Last

Parker has earned its reputation through precision-machined threads and quality materials that handle the pressure spikes and constant vibration that come with farm equipment operation. The swivel feature means less wear on both the hose and fitting over time, especially important when your equipment flexes during field operations.

Installation Notes

This is a crimp-on fitting that requires proper crimping equipment and dies for a secure connection. Always use proper thread sealant on hydraulic fittings – never just tape that can contaminate your system. Clean both fitting surfaces before connecting, and don’t over-tighten as this can damage the threads or crack the fitting body. The swivel action should move freely after installation – if it binds, back off slightly on the thread engagement.